Doorbell Button and Intercom Styles    Color Choices    Installation Instructions     Testimonials    Site Map 

  Order a Doorbell or Intercom    In The News    Contact Us    Payments    Links     FAQs   Home 

Installation Instructions

Single use pack of adhesive now included!

A clean and smooth surface will ensure the ease of installation!!

Items Needed:  screwdriver, tape

  1. 1.Remove the existing doorbell from home and disconnect the two wires.
  2. 2.Place supplied adhesive (E6000 made by GOOP - click for details) on back of doorbell avoiding overlapping the adhesive and the backing tape.  
  3. 3.Let the adhesive set up for about one to two minutes and attach the wires to the contacts on the new button...does not matter which wire on which contact.
  4. 3.Remove the backing paper from the backing tape.  Press the stone against the wall so that the backing tape makes solid contact and allow adhesive to dry.** 
**  If inadequate contact is made to hold the doorbell in place while the adhesive dries, use blue painters tape or masking tape to hold it.
 

CONGRATULATIONS!!!  Your entry is now complete!

3.

Contact us if there are any issues or you need further assistance.

Copyright 2001-2012 CustomDoorbell, All rights reserved.